除非另有声明,本网站内容采用 CC BY-NC-SA 3.0 授权。转载时请注明出处,禁止商用。
本网站是《逃离塔科夫》官方 Wiki 的镜像网站,由无人值守的机器人同步,与Battlestate Games和Fandom没有从属关系。
如您有任何建议,或是想要帮助建设此 Wiki ,请访问反馈中心

全站通知:

临行密密缝 - Part 2

阅读

    

2020-09-01更新

    

最新编辑:

阅读:

  

更新日期:2020-09-01

  

最新编辑:

来自《逃离塔科夫》官方 Wiki(镜像)WIKI_BWIKI_哔哩哔哩
(重定向自Sew it good - Part 2
跳到导航 跳到搜索
临行密密缝 - Part 2
文件:SewItGood1Banner.png
任务信息
种类拾取
布置者Ragman
相关任务
上一个:
Sew it good - Part 1
下一个:
Sew it good - Part 3
The key to success
Other choices
-

临行密密缝 - Part 2 是逃离塔科夫中的任务

对话

You've dealt with hats quick and clean. Now let's move onto some serious things, you've got to be 007 for this one. A need a couple of Gzhel body armor pieces for my thing, and the trick is I need one to be fucked up badly, and another one in just a little better condition. Can you do it?

目标

  • 获得耐久度在0%-50%之间的Gzhel防弹衣
  • 上交耐久度在0%-50%之间的Gzhel防弹衣
  • 获得耐久度在50%-100%之间的Gzhel防弹衣
  • 上交耐久度在50%-100%之间的Gzhel防弹衣

奖励

  • +18,700 经验值
  • Ragman 声望 +0.09
  • 10,000 卢布
  • 2个 ZSh-1-2M面罩
Shaken, not stirred, you're good, man.

指南

任务相关物品
图标 物品名称 数量 要求 备注
文件:GZHELKArmorIcon.png BNTI Gzhel-K armor 2 Handover item Handover x1 at 0% - 50% durability and another at 50% - 100% durability.

The first armor should be between 0% and 50% condition, which is 0 - 32.5 armor points. The second should be between 50% and 100%, which is 32.5 - 65 armor points.

If you are in a raid while wearing a BNTI Gzhel-K armor, you can have a group member shoot the armor to lower the durability on it if you do not have one below 50% of the max durability.


fr:On ne vit qu'une fois - Partie 2 ru:Шить - не тужить. Часть 2